Precision Flat Steel

PFS/BA

Precision flat steel without machining allowance acc. to DIN 59350
For example: 100,0 x 20,0 x 1.000 mm

  • W ground / milled, tol. +0,2 / -0mm
  • T coplanar ground, tol. +0,05 / -0 mm
  • L milled / sawn, tol. +35 / -0 mm
  • Exception: PREMIUM 1.1730 - AISI/SAE 1045: W +0,4 / -0 mm; T +0,25 / -0 mm

The specification for Precision Flat Steel with machining allowance is available in the following Steel Grades:

[PFS]

 

                1.8550
                1.8519
1.2990 mod. L6+QT 1.2361 P20+S     314 1.4122 1.7227
4140
O2 1.2709 ESR ~Chipper P20 420 ESR   316Ti 440B 1.7225
4140
O1 S1 1.2358 1.2294 D3 mod.   S 165 M 430F 4140+QT
1.2826 D6 H13 L2 L3   316L 431 5120
6F7 D2 H13 ESR 1.2162 1045 M2 316 1.4034 5115
6F7 ESR 1.2367 H11 1.2099 1.0570 PM 30 303 1.4031
420 		4820
P20+Ni H10 H11 ESR 420FM Toolox 33 M3 304 1.4021
420 		4337
L6 A2 1.2316 420 Toolox 44 M4 440C 410 4340

 

PFS

Precision flat steel with machining allowance
For example: 100,3 x 20,3 x 1.000 mm

  • W ground / milled, tol. +0,4 / -0 mm
  • T coplanar ground / finely milled, tol. +0,4 / -0 mm
  • L milled / sawn, tol. +35 / -0 mm

The specification for Precision Flat Steel without machining allowance is available in the following Steel Grades:

[PFS / BA]

 

                1.8550
                1.8519
1.2990 mod. L6+QT 1.2361 P20+S     314 1.4122 1.7227
4140
O2 1.2709 ESR ~Chipper P20 420 ESR   316Ti 440B 1.7225
4140
O1 S1 1.2358 1.2294 D3 mod.   S 165 M 430F 4140+QT
1.2826 D6 H13 L2 L3   316L 431 5120
6F7 D2 H13 ESR 1.2162 1045 M2 316 1.4034 5115
6F7 ESR 1.2367 H11 1.2099 1.0570 PM 30 303 1.4031
420 		4820
P20+Ni H10 H11 ESR 420FM Toolox 33 M3 304 1.4021
420 		4337
L6 A2 1.2316 420 Toolox 44 M4 440C 410 4340